• The surface to be painted must be undercoated with Decoprimer. Dilute Decoprimer with 25-30% of clean water by volume and apply to the surface as a single coat, using a roller.
• The complete drying time is 24 hours.
• Once the undercoat is completely dry, apply Mirzasto to the surface.
• Before applying Mirzasto, stir homogenously using a mixing spatula without diluting.
• Apply it to the surface as a single coat using a steel trowel. After applying the product on a 1- 2 m² of surface area, create random patterns without waiting for the paint to dry.
• Repeat this process for the whole surface.
• After 4 hours, sand the uneven parts and remove the dust.
• Then, apply the selected Effect Finish color from the color chart and apply it using a trowel, without diluting.
• After 3 hours, complete the application by applying the second Effect Finish product using a steel trowel.
• The complete drying time is 24 hours.

• The touch dry time is 4 to 5 hours at 23°C / 73.4°F
• The complete drying time is 24 hours at 23°C / 73.4°F

Depending on the surface smoothness, its porosity, and the application methods, for a single coat application:
– 1 lt covers 4,0 – 5,0 m² of the surface.
– 1 kg covers 2,3 – 2,9 m² of the surface.
– The paint consumption for 1 m² area is 200–250 ml and 350–450 gr.

• Surfaces to be painted must be free of dirt, dust, oil, scaling paint. After removing any kind of defect, the surface should be fixed with SAN DECO ACRYLIC PUTTY INTERIOR and undercoated with SAN DECO DECOPRIMER.