Decorative Finish Glitter

Decorative top coat transparent paint with glitter effect.

FEATURES

– Easy to apply and clean.

– Gives a glittery appearance to the applied product.

– It does not change the texture and pattern of the product on which it is applied.

– Its high water vapor permeability allows the steam to expel and the surface to breathe.

– Its perfumed feature gives a pleasant scent to the applied environment.

– It does not harm human health and nature since it is water-based.

ADDITIONAL FEATURES

APPLICATION INSTRUCTIONS

While applying Decorative Finish on decorative paste or other decorative products of putty density, using a trowel or a special brush is suggested.
Dilute Decorative Finish Glitter with 30-40% of clean water by volume and stir homogeneously. Then, apply to the surface as a single layer using a brush or roller on paint-style products.
The temperature of the application environment must be kept between +5°C and +35°C (41℉ and 95℉) during the application and for 24 hours afterward.

DRYING TIME

The touch dry time is 2-3 hours at 23°C / 73.4°F.
The complete drying time is 24 hours at 23°C / 73.4°F.

THEORETICAL CONSUMPTION

Consumption may vary depending on surface smoothness, absorbency, application techniques, and the product to be applied on the sub-surface. Theoretical consumption for the single coat;

– 15-20 m² with 1 liter, – 15-20 m² with 1 kg,

– Paint consumption 50-65 ml and 50-65 g for 1 m² area

SURFACE PREPARATION

Surfaces to be painted must be free of dirt, dust, grease, oil, scaling paint. After removing any kind of defect, the surface should be fixed with SAN DECO ACRYLIC PUTTY INTERIOR and should be undercoated with SAN DECO DECOPRIMER.

DOCUMENTS

GLITTER_DECORATIVE_FINISH_TDS_DP.028.US_