• The surface to be painted must be undercoated with Amarsis Primer. Dilute Amarsis Primer with 5-10% of clean water by volume and apply to the surface as a single coat, using a roller.
• Complete drying time is 24 hours.
• Once the undercoat is completely dry, apply Amarsis to the surface.
• Amarsis can be applied in two different ways; using a brush or a trowel.
• Using a brush: Stir Amarsis slowly and softly using a mixing spatula without diluting.
• Apply the first coat homogeneously with diagonal movements, using a brush.
• After 25 minutes, smooth the surface using a flexible steel trowel.
• At 23°C, after 4-5 hours, apply the second coat using a brush.
• 1 hour after the application and depending on the ambient temperature, crush the colored particles using a flexible steel trowel and give the final look to the surface.
• Using a trowel: Apply Amarsis as a single coat without diluting.
• At 23°C, after 4-5 hours, apply the second coat using a brush.
• 1 hour after the application and depending on the ambient temperature, crush the colored particles using a flexible steel trowel and give the final look to the surface.
• The temperature of the application environment must be kept between +5°C and +35°C during application and for 24 hours afterward.

• The touch dry time is 4-5 hours at +23°C / 73.4°F
• The complete drying time is 24 hours at +23°C / 73.4°F.

Depending on the surface smoothness, its porosity, and the application methods, for a single coat application:
– 1 lt covers 6,5 – 8,5 m² of the surface
– 1 kg covers 5,0 – 6,5 m² of the surface
– The paint consumption for 1 m² area is 120-160 ml and 150-200 gr.

• Surfaces to be painted must be free of dirt, dust, grease, oil, scaling paint. After removing any kind of defect, the surface should be fixed with SAN DECO ACRYLIC PUTTY INTERIOR and undercoated with SAN DECO AMARSIS PRIMER.