• The surface to be painted must be undercoated with Decoprimer. Dilute Decoprimer with 25-30% of clean water by volume and apply to the surface as a single coat, using a roller.
• Once the undercoat is completely dry, apply Atracto to the surface.
• Stir Atracto homogeneously using a mixing spatula without diluting.
• Then, apply to the surface in two coats.
• In the first coat, apply Atracto to the surface using a sponge or a flexible steel trowel.
• After about 6 hours and depending on the ambient temperature, apply the second coat to the surface.
• Apply the second coat using a flexible steel trowel. Then, complete the application by giving patch patterns using a trowel.
• The complete drying time is 24 hours.

• The touch dry time is 5-6 hours at 23°C / 73.4°F.
• The complete drying time is 24 hours at 23°C / 73.4°F.

For one-layer application, depending on the surface smoothness, absorbency, and application techniques;

• 8,0 – 12,5 m² with 1 lt.
• 6.5 – 10.0 m² area is painted with 1 kg.
• Paint consumption for an area of 1 m² is 80 – 125 ml and 110 – 150 gr.

• Surfaces to be painted must be free of dirt, dust, grease, oil, scaling paint. After removing any kind of defect, the surface should be fixed with SAN DECO ACRYLIC PUTTY INTERIOR and undercoated with SAN DECO DECOPRIMER.