• The surface to be pained must be undercoated with Decoprimer.
• Dilute Decoprimer with 25-30% of clean water by volume and apply to the surface as a single coat, using a roller.
• The complete drying time is 24 hours.
• Once the undercoat is completely dry, apply Decostucco to the surface.
• Stir Decostucco thoroughly using the mixing spatula.
• Appy to the surface as a single coat using the Rhombus Trowel. If the desired hiding power is not achieved, the second coat can be applied.
• The complete drying time is 24 hours.
• Once the surface is completely dry,  apply the Decostucco product of the selected color to the surface by giving patterns with the help of a fine painting brush.
• Once the product is completely dry, sand the surface with fine sandpaper, and apply Decostucco, using a trowel.
• Polish the surface by applying pressure using a Rhombus Trowel.
• The complete drying time is 24 hours.
• Apply water-based Wax to the surface in two coats using a Rhombus Trowel without diluting.
• Wait 30 min. – to 1 hour between coats.
• Before the second coat is completely dry, start polishing the surface using a polishing machine.
• The complete drying time is 24 hours.

• The touch dry time is 2 to 3 hours at 23°C / 73.4°F.
• The complete drying time is 24 hours at 23°C / 73.4°F.

The consumption depending on the surface smoothness, its porosity, and the application methods are:
– 1 lt covers 2,85 – 4,30 m² of the surface.
– 1 kg covers 1,65 – 2,50 m² of the surface.
– The paint consumption for 1 m² area is 230–350 ml and 400–600 gr.

• Surfaces to be painted must be free of dirt, dust, grease, oil, scaling paint. After removing any kind of defect, the surface should be fixed with SAN DECO ACRYLIC PUTTY INTERIOR and undercoated with SAN DECO DECOPRIMER.