• The surface to be painted must be undercoated with Decoprimer. Dilute Decoprimer with 25-30% of clean water by volume and apply to the surface as a single coat, using a roller.
• Complete drying time is 24 hours.
• Once the undercoat is completely dry, apply Obiante to the surface.
• Soften Obiante by stirring homogeneously using a mixing spatula without diluting.
• Apply the product to the surface with a steel trowel in the preferred thickness as a single coat in the same amount. Then, create the desired pattern by using the Texturing Float.
• After 20 minutes, when the product starts to dry, spray some clean water, press, and smooth the surface using a steel trowel.
• The complete drying time is 24 hours.
• After complete drying, more than one Pearlescent Decorative Finish product color can be used upon request.
• Complete the application process by applying the selected Decorative Finish color using a roller and gently wiping the surface with the help of a damp sponge.
• The complete drying time is 24 hours.

• The touch dry time is 5 to 6 hours at 23°C / 73.4°F.
• The complete drying time is 24 hours at 23°C / 73.4°F.

Depending on surface smoothness, porosity, and application methods, for a single coat application;

• 1 lt covers 1,05 – 1,40 m² of the surface.
• 1 kg covers 0,65 – 0,85 m² of the surface.
• The paint consumption for 1 m² area is 715–950 ml and 1200–1600 gr.

• Surfaces to be painted must be free of dirt, dust, grease, oil, scaling paint. After removing any kind of defect, the surface should be fixed with SAN DECO ACRYLIC PUTTY INTERIOR and undercoated with SAN DECO DECOPRIMER.