• Dilute Decopia with 3-5% of clean water by volume before the application.
• Once the undercoat is completely dry, apply Decopia to the surface in one layer using a brush or roller.
• The environment of the application must be kept between +5°C to +35°C (41 ℉ and 95 ℉) within 24 hours during and after the application.

Depending on the surface smoothness, its porosity, and the application methods, for a single coat application:
– 1 lt covers 16,5 – 20,0 m² of the surface
– 1 kg covers 16,5 – 20,0 m² of the surface
– The paint consumption for 1 m² area is 50–60 ml and 50–60 gr.

• Surfaces to be painted must be free of dirt, dust, grease, oil, scaling paint. After removing any kind of defect, the surface should be fixed with SAN DECO ACRYLIC PUTTY INTERIOR and undercoated with SAN DECO UNIPRIMER.
• It is recommended to apply a matte interior paint, San Deco Decoplas, on top of the product.
• The recommended matte paint Decoplas should be diluted with a maximum of 20% clean water by volume and applied in two coats using a roller or brush without leaving any spots.
• Wait for a minimum of 4 hours between coats.