Sandecoshield

Sandecoshield

Transparent, protective coating with wet volume, used indoors and outdoors.

FEATURES

 

– Its high water-repellency blocks mold.

– It provides long-term durability to the applied surface and provides low dirt retention.

– Its high water vapor permeability allows the steam to expel and the surface to breathe.

– It does not harm human health and nature since it is water-based.

ADDITIONAL FEATURES

  • After surface preparation, dilute SANDECOSHIELD (glossy/matt) with 25-30% of clean water and stir homogeneously.
  • Then applied in two coats using a brush and a roller.
  • Wait for 5 hours between each coat.
  • The temperature of the application environment must be kept between +5°C and +35°C (41 ℉ and 95 ℉) during application and for 24 hours afterward.
  • The touch dry time is 5-6 hours at +23°C / 73.4°F.
  • Hardening time is 8 hours at +23°C / 73.4°F.
  • Complete dry time is 24 hours at +23°C / 73.4°F.

Depending on surface smoothness, porosity, and application methods for a single coat application;
– 1 lt covers 8,5-11 m² of the surface.
– 1 kg covers 8,5-11 m² of the surface.
– The paint consumption for 1 m² area is 90-120 ml and 90-120 gr.

  • Surfaces to be painted must be free of dirt, dust, grease, oil, scaling paint.
  • All loose material on chalky and dusty surfaces should be removed using a stiff bristle brush or wire brush.

GET A QUOTE