Rulotex

Acrylic emulsion-based, long-lasting exterior textured coating.

FEATURES

– It preserves its elasticity even at low temperatures.

– It is not affected by the cracks that occur as a result of the settlement of the buildings.

– Provides complete protection against exterior weather conditions on applied surfaces.

– It repairs the cracks on the surface.

– It prevents mold and fungus.

– High alkaline resistance.

– Resistant to UV.

– Its high water vapor permeability allows the steam to expel and the surface to breathe.

– It does not harm human health and nature since it is water-based.

APPLICATION INSTRUCTIONS

Before application, dilute Rulotex with 5-10% of clean water by volume and stir well.
Apply to the surface in one coat using a roller, brush, or spraying method as one layer.
If an application with a thick pattern is preferred, the product can be applied undiluted.
The application environment must be kept between +5°C to +35°C (41 ℉ and 95 ℉) within 24 hours during and after the application.

DRYING TIME

THEORETICAL CONSUMPTION

Depending on surface smoothness, porosity, and application methods, for a single coat application;
-1 lt covers 0,71 – 1,00 m² of the surface.

SURFACE PREPARATION

Surfaces to be painted must be free of dirt, dust, grease, oil, scaling paint. After removing any kind of defect, the surface should be fixed with San Deco Acrylic Putty Exterior.
Before the application, the surface can be prepared with San Deco Uniprimer in a color suitable for the selected color, or Rulotex can be thinned with 30% clean water by volume to get better results and used instead of primer.

DOCUMENTS

Follow us on Instagram